Crack Fill Paste is a single pack, ready to use flexible putty for filling the cracks in plastered surfaces.
Exterior & interior plastered surfaces
25-30 running meters/ kg
Can paint over it after 24hours.. Full curing time at 30°C: 7days
Surface Preparation: Remove all dirt, loose paint, flakes using wire mesh.
|Coverage||110 - 120 sq.ft. / litre / 1coat. (May vary depending on surface condition, dilution, etc)|
|For Surface||Exteriors - masonry, plaster, asbestos|
|Drying Time||Surface Dry: 15 minutes. Hard Dry: 6- 8 hours|
|Dilution Ratio||Upto 100% by volume|
|Recommended Thinner||Potable Water|
|Pot Life of Thinned Material||Use within 24 hours|
|Application Method||Brush, Spray|
|Fire Hazard Class||Water based product, hence non-flammable|
|Toxicity||VOC: 30-35 gm / litre.|
|USP||Extra whiteness, opacity, gives better coverage to top coat. Seals porosity of surface, reduces absorbtion.|