The only product in Indian market with triple booster formulation that fights against dampness, efflorescence, and alkalinity, at the same time acts as a superior undercoat for direct top coat application. Our product is a sealer system that works both as a sealer and as an undercoat with excellent hiding property - the 1st ever configuration in Indian Market. What is Triple Booster formulation?
1st Booster - Penetrative Acrylic Polymer,
2nd Booster – SILICON
3rd Booster - Titanium DI Oxide
First point to be noted is the use of Penetrative Polymer that will enter into the pores and will seal the surface, creating a strong barrier against Dampness, efflorescence, alkali resistance etc.
Second is the addition of SILICON – an additive which has the ability to repeal water.
Third, because of Titanium DI Oxide, unlike all other system available in the market our SEALOPRIME can acts as sealer and undercoat both, to all sort of Paint System be it Exterior or Interior.
Fourth, there is huge improvement for top coat coverage. If top coat emulsion is applied directly over SEALOPRIME, minimum 20% more coverage will be achieved.
Penetrates inside the pores thus gives remarkable resistance to water.
Superior Whiteness and better hiding.
Gives higher coverage to top coat with better sheen.
Validates our effort in striving towards cleaner, more sustainable future.
Matt, no sheen
Interiors & Exterior - masonry, plaster, false ceiling etc
110 - 120 sq.ft. / litre / coat. (May vary depending on surface condition, dilution, etc)
50% by volume
Use within 24 hours
Water based product, hence non-flammable
VOC: 45 gm / litre.
Area of application:It is of multipurpose use. It can be used as simple undercoat on cement, concrete, plaster or tiles surface both in interior and exterior.
Surface Preparation: Remove all dirt, loose paint, flakes using wire mesh. Fill minor cracks with Home Shield Crack Fill Paste, Cracks which are larger than 5mm have to be filled up with cement work. Let it dry completely, Check moisture content of the substrate. It should be below 12% for superior performance of the primer.
|Coverage||110 - 120 sq.ft. / litre / coat|
|For Surface||Interiors & Exterior - masonry, plaster, false ceiling etc|
|Finish||Matt, no sheen|
|Drying Time||Surface Dry: 20 - 30 minutes at 60% RH, 25˚C. Hard Dry: 4- 6 hours|
|Dilution Ratio||50% by volume|
|Recommended Thinner||Potable Water|
|Pot Life of Thinned Material||Use within 24 hours|
|Fire Hazard Class||Water based product, hence non-flammable|
|Toxicity||VOC: 45 gm / litre.|
|USP||Waterproofing ability, superior whiteness, higher coverage to top coat and alkali resistant|