BP White Primer (ST) is an oil modified alkyd based primer suitably pigmented with micro fine pigments and extenders. It is a white primer ideal for plaster surfaces and can be used in wooden and ferrous –metallic substrate. It is free from any heavy metals like lead, mercury & chromium.
Masonry, ferrous metallic, wooden, plaster, asbestos, fibre board and false ceiling
80 - 100 sq.ft. / litre / 1coat. (May vary depending on surface condition, dilution, etc)
Mineral Turpentine Oil (MTO)
Flammable, Flash point above 30°C (Abel Closed Cup)
Surface Preparation: Ensure the surface is rubbed properly with Sand Paper No. 60/80/100/120 in phases to ensure all dirt is removed. Wipe clean with Mineral Turpenitne Oil (MTO) and make sure the surface is fully dry. One or two coats of primer can be used depending on the requirement after diluting properly and straining clean through a clean cloth. It can be applied by brush or spray. Brushing viscosity should be 60-65 sec at 30°C in Ford Cup B4; for spray application viscosity should be 40-45 sec at 30°C in Ford Cup B4.
|Coverage||80 - 100 sq.ft. / litre / 1coat. (May vary depending on surface condition, dilution, etc)|
|For Surface||Interiors - masonry, plaster, asbestos, fibre board and false ceiling|
|Drying Time||Surface Dry: 1 - 2 hours. Hard Dry: 4- 6 hours (overcoating preferably overnight)|
|Dilution Ratio||Upto 100% by volume|
|Recommended Thinner||Potable Water|
|Pot Life of Thinned Material||Use within 24 hours|
|Application Method||Brush, Roller, Spray|
|Fire Hazard Class||Water based product, hence non-flammable|
|Toxicity||VOC: 20-25 gm / litre.|
|USP||Superior whiteness and opacity, alkali resistant, high chalk resistance|