BP Cement Primer (Water Thinnable) is prepared with 100% acrylic binder and micro fined pigments along with extenders and different additives. It is an air drying low smell primer which provides hard tough film. It is good for interior masonary and asbestos surfaces and is free from any heavy metals. It is a high whiteness primer with high chalk resistance and opacity.
Interiors - masonry, plaster, asbestos, fibre board and false ceiling
80 - 100 sq.ft. / litre / 1coat. (May vary depending on surface condition, dilution, etc)
Upto 100% by volume.
Use within 24 hours
Brush, Roller, Spray
Water based paint, hence non-flammable
VOC: 20-25 gm / litre.
Surface Preparation: Ensure the surface is rubbed properly with Sand Paper No. 60/80/100/120 in phases to ensure all dirt is removed. Wipe clean with water and make sure the surface is fully dry. Apply 1 Coat of BP Cement Primer (WT) after diluting properly and straining clean through a clean cloth. It can be applied by brush or spray. Brushing viscosity should be 40-50 sec at 30°C in Ford Cup B4; for spray application viscosity should be 25-40 sec at 30°C in Ford Cup B4.
|Coverage||80 - 100 sq.ft. / litre / 1coat. (May vary depending on surface condition, dilution, etc)|
|For Surface||Interiors - masonry, plaster, asbestos, fibre board and false ceiling|
|Drying Time||Surface Dry: 1 - 2 hours. Hard Dry: 4- 6 hours (overcoating preferably overnight)|
|Dilution Ratio||Upto 100% by volume|
|Recommended Thinner||Potable Water|
|Pot Life of Thinned Material||Use within 24 hours|
|Application Method||Brush, Spray|
|Fire Hazard Class||Water based product, hence non-flammable|
|Toxicity||VOC: 20-25 gm / litre.|
|USP||Superior whiteness and opacity, alkali resistant, high chalk resistance|